This article will explain how to calibrate the AUTOMATiQ, using the integrated Bafang system.
When to conduct a calibration
Calibrating the automatic shifting interface is always needed after one of the following:
- After the initial assembly of the e-bike.
- When the automatic shifting hub interface (e.g. AUTOMATiQ) was removed for maintenance reasons.
- When the system does not work properly.
Calibration options
These are the many ways you can calibrate an AUTOMATiQ hub interface:
With a smartphone or tablet
With a CLiQ controller
With the bike's integrated system
- How to calibrate the AUTOMATiQ using a BOSCH integrated display
- How to calibrate the AUTOMATiQ using the Bafang integrated display
- How to calibrate the AUTOMATiQ using the FIT integrated display
- How to calibrate the AUTOMATiQ using the Specialized integrated display
Step-by-step instructions
Video
Tools
- A bicycle with a Bafang integrated system.
Calibration instructions
- Turn on the Bafang system.
- Select no motor assist.
- To calibrate the bike, double-press the [I] button.
- Scroll down in the settings screen to e-shifting and select ‘Calibration’ to start the calibration.
- Confirm by pushing the I-button.
Calibration done
Enjoy the ride! If you followed all the steps the e-bike is ready to go. If you have any questions, feel free to reach out to our Support team.