enviolo Automatic is the way to unlock the full potential of the enviolo hub, designed to automatically adjust the bike's gear ratio without manual input from the rider. It combines the continuously variable planetary (CVP) technology with an electronic control system, allowing you to fully focus on the cargo or surroundings.
Key Features of enviolo AUTOMATiQ
-
Automatic Shifting: Instead of manually adjusting the gear ratio, the AUTOMATiQ system automatically shifts based on your cadence (pedaling speed). The system ensures that you're always in the optimal gear ratio for smooth, efficient riding, whether you're climbing a hill or cruising on flat roads.
-
Cadence Setting: Riders can customize their preferred cadence through a smartphone app, a BLE conrtroller or via the remote of the eBike motor system. Once set, the system will automatically adjust the gear ratio to maintain that cadence, regardless of changes in terrain or speed.
-
Low Maintenance: Like the enviolo hub, the AUTOMATiQ is enclosed, reducing the need for frequent maintenance. The electronic controls add an extra layer of convenience, even removing complicated cable routing through the frame.
-
eBike Integration: It is possible to integrate enviolo AUTOMATiQ into the drive system to provide a clean handlebar and to make it convenient to adjust the cadence setpoint.
-
User-Friendly: The system is designed to make cycling more accessible and enjoyable, particularly for riders, who are less experienced with gear shifting. The automatic nature of the system removes the manual shifting, allowing riders to focus on the surroundings or simply enjoy the ride.
How It Works
- Sensors: The system uses sensors to monitor your cadence and speed. To do this there are two magnet rings located on the enviolo gear hub, one on the sprocket and one on the hub shell.
- Calibration: The calibration of the Automatic interface on the hub allows the system to know where the low and high end of the shifting range is. Since October 2023 most of the enviolo AUTOMATiQ interfaces have a feature called 'auto calibration'. Which allows the system to continuously calibrate while riding. Your AUTOMATiQ can retroactively be equipped with this feature by updating the firmware via the enviolo App.
- Configuration: The configuration allows the system to know the bike system, possible integrations, and most importantly the sprocket, chainring and wheel circumference to shift perfectly to the desired cadence setpoint.