We offer flat 2.3mm thick sprockets from 16 to 22 teeth for 3/32" chains, and a 20 tooth offset sprocket for 1/8" chains. Chainline on the flat sprockets is 49mm on 135mm and 142mm hubs, the 148mm hubs have a 52mm chainline. The offset on the 1/8"sprocket is 3mm bringing the chainline in to 46 or 49mm.

 

Below you can find an overview of the available Gates belt sprockets for enviolo internal gear hubs. We continue to work closely with Gates and further options might be in development, so should you be interested in options that are not listed here, please reach out to our team.

 

mceclip0.png

CDX belt sprocket for enviolo CT/CO/CA/TR/SP (135/142mm)

Tooth Beltline Tooth outer diameter Sprocket width Mounting web thickness Article #
22 45.5mm 75.33mm 11.6mm 4.3mm CT1122VMN
24 45.5mm 82.26mm 11.6mm 4.3mm CT1124VMN
26 45.5mm 89.31mm 11.6mm 4.3mm CT1126VMN
28 45.5mm 96.31mm 11.6mm 4.3mm CT1128VMN

 

CDX belt sprocket for enviolo SP (148mm)

Tooth Beltline Tooth outer diameter Sprocket width Mounting web thickness Article #
22 48.7mm 75.33mm 11.6mm 4.3mm CT1122VMN
24 48.7mm 82.26mm 11.6mm 4.3mm CT1124VMN
26 48.7mm 89.31mm 11.6mm 4.3mm CT1126VMN
28 48.7mm 96.31mm 11.6mm 4.3mm CT1128VMN
Was this article helpful?
5 out of 5 found this helpful