CVP-TR-36MBK-DC-RL.jpg

Colors Matt black
Weight 2450g
Max Speed (RPM) 800RPM
Nominal ratio range 380% (0.5 - 1.9)
Max continuous torque from the drive system 85Nm*
Max peak torque from the drive system 90Nm*
Max nominal power input from the drive system 250W*
Max gross vehicle weight (rider / cargo / bike) 180kg*
Lifetime 20.000km
IP classification Hub=IP65; Freewheel=IP54; Rear hub interface=IP54
Temperature range -20°C to 48°C
Brake options 6-bolt disc/rim/roller
Max brake disc rotor 180mm
Disc brake screw length requirements 10-17mm
Max disc brake screw torque Use disc brake manufacturers recommendation but don´t exceed 6.2Nm
Spoke options 32/36
Spoke size 2mm - 2.34mm
Spoke flange diameter 125mm
Spoke hole diameter 2.9mm
Wheel size Minimum 16"
Axle threads M10*1
Dropout width 135mm
Dropout thickness 6-10mm
Dropout length for no-turn washer engagement (measured from axle center) Recommended 14mm; Minimum 10mm
Total axle width (without acorn nuts) 183mm
Chainline 49.0 +/- 0.5mm
Beltline (Gates) 45.5 +/- 0.5mm
Sprocket thickness (chain) 2.3mm
Sprocket thickness (belt) 4.3mm
Sprocket sizes (chain) 16-22T
Sprocket sizes (belt) 20-28T
Sprocket type 9-spline, one side flat
Chain type 3/32", 1/8" with 3mm offset cog
Min sprocket ratio (pedal bike) 1.8
Min sprocket ratio (front motor) 1.8
Min sprocket ratio (mid motor) 2.0
Min sprocket ratio (Bosch Gen2) 0.80
Min sprocket ratio (MPF) 1.55
Recommended lacing patterns 2-cross for 26" or lager, 1-cross for 24" or smaller, radial spoking is not allowed

mceclip0.png

Was this article helpful?
5 out of 6 found this helpful