1. Shift to a position that allows easy access to the shift cable hardware.
2. [A] Remove shift cable hardware following steps (A, B and C). Using the one-turn interface (D) you have to carefully push aside the snap feature to remove the shift cable hardware.

mceclip0.png
3a. [B] For the variants enviolo CT/TR/CO
Loosen and/or remove the axle nuts (A), followed by the non-turn washers.

mceclip1.png
For rim and roller brake applications follow the manufacturer´s instructions.
3b. For the variants enviolo CA/SP:
1. 135mm variants: Loosen and remove the axle bolts and washers.


For rim brake applications follow the manufacturer´s instructions.
2. 142/148mm variants: Loosen and remove the axle bolts and left side adapter.


For rim brake applications follow the manufacturer´s instructions.
4. Remove the rear wheel.
In some cases, it is easiest to remove the chain from the front chainring to ease the rear wheel
removal.

Was this article helpful?
0 out of 0 found this helpful