1. Shift to a position that allows easy access to the shift cable hardware.
2. [A] Remove shift cable hardware following steps (A, B and C). Using the one-turn interface (D) you have to carefully push aside the snap feature to remove the shift cable hardware.

mceclip0.png
3a. [B] For the variants enviolo CT/TR/CO
Loosen and/or remove the axle nuts (A), followed by the non-turn washers.

mceclip1.png
For rim and roller brake applications follow the manufacturer´s instructions.
3b. For the variants enviolo CA/SP:
1. 135mm variants: Loosen and remove the axle bolts and washers.


For rim brake applications follow the manufacturer´s instructions.
2. 142/148mm variants: Loosen and remove the axle bolts and left side adapter.


For rim brake applications follow the manufacturer´s instructions.
4. Remove the rear wheel.
In some cases, it is easiest to remove the chain from the front chainring to ease the rear wheel
removal.

Was this article helpful?
12 out of 16 found this helpful