1. System Functionality

The AUTOMATiQ system provides automatic shifting for the rider at all times. It can be utilized
with either the enviolo CO controller or enviolo CA controller making shifting as simple as
pressing a button to choose your pedal cadence.

 

2. Setup
[A] ENVIOLO CO CONTROLLER
The enviolo CO controller can be used to adjust the desired cadence. The enviolo CO buttons
are assigned by lower cadence (UP), calibration (CENTER) and higher cadence (DOWN). You can
accelerate the desired cadence adjustment from increments of 1 to 5 by pushing and holding the UP/
DOWN buttons.
mceclip0.png
[B] ENVIOLO CA CONTROLLER
The enviolo CA controller can be used to adjust the desired cadence. The enviolo CA buttons are
assigned by lower cadence (UP or RIGHT), power up (CENTER) and higher cadence (DOWN or LEFT). UP
and DOWN buttons adjust the desired cadence by increments of 1 and LEFT/RIGHT adjust the desired
cadence by increments of 5.

mceclip1.png

Was this article helpful?
0 out of 0 found this helpful