Generate a configuration QR code that you can use to configure the Enviolo Automatic (AutomatiQ) interface via the Enviolo app.
How to use
- Check Get Production Configuration to see if your bike model is available.
- If you cannot find your model, select Create New Configuration.
Get the best performance
Make sure to enter correct details for best Enviolo Automatic behaviour.
Configuration tool
There are no Production Configurations available for this
Brand.
If you can't find your brand, search by parent company (e.g.
KOGA bikes belong to ACCELL).
If you can't find your brand, search by parent company (e.g.
KOGA bikes belong to ACCELL).
Important for Bosch Generation 2 Motors: If your bike is equipped
with a front sprocket smaller than 20 teeth, please contact Enviolo
Support for further assistance.
AUTO mode is always the recommended mode.
The CAN protocol is only for bikes that do not have a separate
Enviolo controller on the steering wheel. If you can change the
cadence directly via the bike's display, the CAN protocol is
required.
Generating Configuration...
Make sure that all information is correct before upload
An incorrect configuration may cause poor or unexpected riding behaviour. Before uploading the configuration QR to the Automatic, make sure that all specs are correct. If you do upload a wrong configuration, generate a new correct one to replace it.