The LED on the Enviolo Automatic hub interface (AHI) is showing magnet rings detection, calibration feedback and connectivity information. A list of LED behavior will help with troubleshooting and setting the AHI.
Note
The LED on the Enviolo Automatic (AutomatiQ) hub interface turns off if wheel speed is higher than 5km/h.
LED colour explanation
| Function | LED color | State |
|---|---|---|
| Wheel speed higher than 5km/h | OFF | LED is turned off |
| Bluetooth pairing active | Blue | Toggling every 1s |
| Bluetooth pairing failed | Red | ON for 3 seconds |
| Bluetooth pairing success | Green | ON for 3 seconds |
| Bluetooth connected | Blue | ON continuously |
| Command received (Bluetooth or CAN) | Green | ON for 0.2s every 2s |
| Calibration required | Red Green | Alternating every 1s |
| During calibration | Red Green | Alternating every 1s |
| Input speed ring pulse detected | Green | ON for 0.2 seconds |
| Output speed ring pulse detected | Red | ON for 0.2 seconds |
Further help
If you still have any questions, don't hesitate to contact support.