This is an overview of all Enviolo Automatic (AutomatiQ) firmware version releases. This covers only the interface firmware (not the app or controllers).
Current versions
V13
- Bosch Smart System BES3 Bluetooth connection stability is improved
- Support for full FIT 1 integration
- Cadence control stability is increased by introducing different shift speeds and control gains at different gear ratios
- Power ON performance is improved by optimising startup procedure
- Improved calibration error detection filter that could results in wrong calibration while walking the bike backwards
- Detection of one or more missing magnets in OSS or ISS magnet ring is connected to Bosch BES2 770/771 errors
- Manual mode stability and consistent shifting is improved
R49
- Cadence control stability is increased by introducing different shift speeds and control gains at different gear ratios
- Power ON performance is improved by optimizing startup procedure
- Improved calibration error detection filter that could results in wrong calibration while walking the bike backwards
- Detection of one or more missing magnets in OSS or ISS magnet ring is connected to Bosch BES2 770/771 errors
- Manual mode stability and consistent shifting is improved
Past firmware versions
V12
April 15, 2024
- Improved stability with Bosch SMART system Bluetooth connection
- Bosch SMART system software update is mandatory to ensure full connection stability
R48
April 15, 2024
- The manual calibration process is now fully automatic and has moved to the background. There is no need to calibrate the Enviolo Automatic anymore.
- Improved shifting algorithm reduced unwanted behaviour that sometimes could result in busy behaviour, excessive noise, or empty pedal feeling.
- Comfort, Eco, and Sport profiles are now unified into one profile that provides the best shifting experience in all conditions.
V11
December 20, 2023
- Changed CLiQ button behavior. Short click is now changing the value of cadence setpoint or simulated gear by 1 unit and long click by 5. Plus or up button is now increasing cadence setpoint or simulated gear and Minus or down button is now decreasing cadence setpoint or simulated gear.
- Signal LED now turns off after bicycle speed is higher than 5km/h to conserve energy and reduce visual impact.
- Implemented fix for inaccurate error 65 occuring in Bafang motor integration.
- Optimized handshake between the Enviolo Automatic and Bosch Smart System.
R47
January 20, 2023
- Reduced power consumption in standby mode.
V10
October 4, 2023
- The manual calibration process is now fully automatic and has moved to the background. There is no need to calibrate the Enviolo Automatic anymore.
- Improved shifting algorithm reduced unwanted behavior that sometimes could result in busy behavior, excessive noise, or empty pedal feeling.
- Enviolo Automatic configuration is now simplified and has 9 instead of 16 configurable parameters.
- Comfort, Eco, and Sport profiles are now unified into one profile that provides the best shifting experience in all conditions.
- Support for Bosch BES3 eShift integration has been added.
V07
November 16, 2022
- Improved advanced calibration (quicker calibration, more accurate cadence & better coasting)
V06
June 16, 2022
- Fixed bug on Bafang integrated drive systems
V05
May 12, 2022
- Added support for Bafang drive system integration with Enviolo Automatic (only compatible with supported Bafang drive systems)
R46
November 16, 2022
- Improved advanced calibration (quicker calibration, more accurate cadence & better coasting)
R45
October 4, 2021
- Simplification of the calibration process (*please note the calibration process will be extended to ~25 seconds and pedal speed needs to be higher than 30RPM).
R44
July 15, 2021
- Stabilized calibration process (*please note the calibration process will be extended to ~25 seconds and pedal speed needs to be higher than 30RPM).
R42
April 29, 2021
- Added MY22 product lineup.
R40
September 22, 2020
- Improved too aggressive downshift on downhill rides.
- Reduced stoplight setting trigger from 6km/h to 4km/h.
R38
August 3, 2020
- Further improved speed sensor detection.
R37
July 20, 2020
- Added compatibility to enviolo SP & CLiQ Pro controllers.
R35
June 4, 2020
- Added compatibility to enviolo CO, CA, CLiQ Pure & CLiQ Plus controllers.
R33
May 19, 2020
- Corrected Bosch Intuvia display indication during charging.
R26 - R32
- Development releases to enable the use of enviolo BLE controllers.
R25
September 26, 2019
- Initial mass production release.
R1 - R24
- Development releases.