This is an overview of all enviolo AUTOMATiQ firmware version releases. This does not capture enviolo App or rider controller firmware releases at this point.

  • R1-R24 Development releases 
  • R25 (Released on September 26, 2019)
    • Initial mass production release
  • R26-R32 Development releases for BLE controller
  • R33 (Released on May 19, 2020)
    • Corrected Bosch Intuvia display indication during charging
  • R35 (Released on June 4, 2020)
    • Added compatibility to enviolo CO, CA, CLiQ Pure & CLiQ Plus controllers
  • R37 (Released on July 20, 2020)
    • Added compatibility to enviolo SP & CLIQ Pro controllers
  • R38 (Released on August 3, 2020)
    • Further improved speed sensor detection
  • R40 (Released on September 22, 2020)
    • Improved too aggressive downshift on downhill rides
    • Reduced Stop light setting trigger from 6km/h to 4km/h
  • R42 (Released on April 29, 2021)
    • Added MY22 product lineup
  • R44 (Released on July 15, 2021)
    • Stabilized calibration process (*please note the calibration process will be extended to ~20seconds and pedal speed needs to be higher than 30RPM)
Was this article helpful?
8 out of 10 found this helpful