This is an overview of all enviolo AUTOMATiQ firmware version releases. This covers only the AUTOMATiQ hub interface (not the AUTOMATiQ app or controllers).

Current versions

V13

• Bosch Smart System BES3 Bluetooth connection stability is improved​

• Support for full FIT 1 integration

• Cadence control stability is increased by introducing different shift speeds and control gains at different gear ratios​

• Power ON performance is improved by optimizing startup procedure​

• Improved calibration error detection filter that could results in wrong calibration while walking the bike backwards​

• Detection of one or more missing magnets in OSS or ISS magnet ring is connected to Bosch BES2 770/771 errors​

• Manual mode stability and consistent shifting is improved​

R49

• Cadence control stability is increased by introducing different shift speeds and control gains at different gear ratios​

• Power ON performance is improved by optimizing startup procedure​

• Improved calibration error detection filter that could results in wrong calibration while walking the bike backwards​

• Detection of one or more missing magnets in OSS or ISS magnet ring is connected to Bosch BES2 770/771 errors​

• Manual mode stability and consistent shifting is improved​

Past firmware versions

V12

• Improved stability with Bosch SMART system Bluetooth connection
• Bosch SMART system software update is mandatory to ensure full connection stability

R48

• The manual calibration process is now fully automatic and has moved to the background. There is no need to calibrate AUTOMATiQ anymore.
• Improved shifting algorithm reduced unwanted behavior that sometimes could result in busy behavior, excessive noise, or empty pedal feeling.
• Comfort, Eco, and Sport profiles are now unified into one profile that provides the best shifting experience in all conditions.

V11

December 20th 2023

• Changed CLiQ button behavior. Short click is now changing the value of cadence setpoint or simulated gear by 1 unit and long click by 5. Plus or up button is now increasing cadence setpoint or simulated gear and Minus or down button is now decreasing cadence setpoint or simulated gear.
• Signal LED now turns off after bicycle speed is higher than 5km/h to conserve energy and reduce visual impact.
• Implemented fix for inaccurate error 65 occuring in Bafang motor integration.
• Optimized handshake between AUTOMATiQ and Bosch smart system.

R47

January 2023

• Reduced power consumption in standby mode.

V10

October 4, 2023

• The manual calibration process is now fully automatic and has moved to the background. There is no need to calibrate AUTOMATiQ anymore.
• Improved shifting algorithm reduced unwanted behavior that sometimes could result in busy behavior, excessive noise, or empty pedal feeling.
• AUTOMATiQ configuration is now simplified and has 9 instead of 16 configurable parameters.
• Comfort, Eco, and Sport profiles are now unified into one profile that provides the best shifting experience in all conditions.
• Support for Bosch BES3 eShift integration has been added.

V07

November 16, 2022 

• Improved advanced calibration (quicker calibration, more accurate cadence & better coasting)

V06

June 16, 2022

• Fixed bug on Bafang integrated drive systems

V05

May 12, 2022

• Added support for Bafang drive system integration with AUTOMATiQ (only compatible with supported Bafang drive systems)

R46

November 16, 2022

• Improved advanced calibration (quicker calibration, more accurate cadence & better coasting)

R45

October 4, 2021

• Simplification of the calibration process (*please note the calibration process will be extended to ~25 seconds and pedal speed needs to be higher than 30RPM).

R44

July 15, 2021

• Stabilized calibration process (*please note the calibration process will be extended to ~25 seconds and pedal speed needs to be higher than 30RPM).

R42

April 29, 2021

• Added MY22 product lineup.

R40

September 22, 2020

• Improved too aggressive downshift on downhill rides.
• Reduced stoplight setting trigger from 6km/h to 4km/h.

R38

August 3, 2020

• Further improved speed sensor detection.

R37

July 20, 2020

• Added compatibility to enviolo SP & CLIQ Pro controllers.

R35

June 4, 2020

• Added compatibility to enviolo CO, CA, CLiQ Pure & CLiQ Plus controllers.

R33

May 19, 2020

• Corrected Bosch Intuvia display indication during charging.

R26 - R32

• Development releases to enable the use of enviolo BLE controllers.

R25

September 26, 2019

• Initial mass production release.

R1 - R24

• Development releases.