This article will explain how to properly set up the cable slack on bikes equipped with enviolo manual systems.

Step-by-Step instructions

Video

Tools

• No tools needed

Adjustment instructions

1. Rotate both barrel adjusters equally, counterclockwise.
   • Cable slack can be adjusted with the barrel adjusters (A) on the controller.
     
2. Ensure a cable slack between 0.5-1mm (B).
   • Pulling lightly by the cable housing at the controller, to verify the slack.
   • ~0.5mm of slack is ideal.
   • More than 2.0mm cable slack decreases shift performance and cable durability.
   • For rear wheel removal, additional cable slack may be desired to ease shift cable hardware removal.
     

Done

If you follow all the steps above, you have the right cable slack from smooth shifting. If you have any questions, don't hesitate to contact support.