This article will explain how to replace the rubber grip of the enviolo manual controller. In case the rubber part is worn off, but the controller generally still works as intended you can replace the rubber part alone.

"I want to replace the entire grip, including the internals"

If you need to replace the entire shifting grip (e.g. if the shifting grip is malfunctioning) see how to replace the shifting grip with all internals.

Step-by-step instructions

Tools

• No tools needed

Servicing instructions

1. Remove the handlebar grip, leave the controller as is.
2. Pull on the grip (hard) to remove it. The controller, including the cables, can stay on the handlebar
3. Position the new grip correctly with the grooves aligned.

Next guide

Once you're done replacing the grip, proceed to replace the cables:

• How to replace shifter cables