See how to configure an Enviolo Automatic (AutomatiQ) interface after assembling it on your e-bike.

This is part of a series of 5 retrofit guides to install the new Enviolo Automatic.

Retrofit guides index

List of all Enviolo Automatic (AutomatiQ) retrofit guides, part by part:

• Intro - Hub interface assembly options
  • Part 1.A - Assembly from Automatic+ or Harmony H|sync
  • Part 1.B - Assembly from Automatic or Harmony
  • Part 1.C - Assembly from Manual
• Part 2 - Rear wheel assembly
• Part 3 - Configuration
• Part 4 - Calibration
• Part 5 - CliQ controller (optional)

Step-by-step instructions

Tools

• A smartphone with the Enviolo Automatic (AutomatiQ) app installed:
  • Android 8 or higher - Download from Google Play Store.
  • iOS 13 or higher - Download from Apple App Store.
• A configuration QR code:
  • Generate one via the Generate QR tool.

Configuration instructions

1. Activate Bluetooth on your smartphone.
2. Open the Enviolo app on your smartphone.
3. Turn on the e-bike drive system.
4. On the Devices List panel, tap on your Enviolo Automatic interface.
   • If you’re connecting to an Enviolo Automatic interface for the first time, then you need to pair it first. 
   • To activate pairing mode, press the white button on the interface (A) for 3 seconds until it starts blinking blue. The Enviolo Automatic will then show in the Devices List. More details on this pairing guide.
     
5. Once you get to the main screen, the Settings panel, tap on Scan QR.
6. On the Scan QR panel, press again on Scan QR.
   • A brand new Enviolo Automatic interface will require an configuration using the Generate QR tool.
   • Make sure to give the App permission to access the camera. 
   • Scan the QR Code to upload the configuration.
     

Proceed to the next step

Continue - Retrofit Part 4: Calibration.