This guide will walk you through how to manually calibrate the Enviolo AutomatiQ using a SPECIALIZED system, and when the automatic interface has older firmware (R47 and V09, and older).
When to conduct a calibration
Auto calibration
Auto calibration is the best way to calibrate the Enviolo Automatic – available since firmware version R48 and V10. To update your firmware, see: How to update the Enviolo Automatic with the latest firmware version
Auto calibration keeps the system optimized
If your system is up to date – latest app and firmware – the Enviolo Automatic will passively calibrate while riding. It is the best way to keep your system optimised.
Calibration options
Manual calibration
Manual calibration of the Enviolo Automatic is only required when using older firmware versions (pre-firmware R48 and V10) and after one of the following:
- After the initial assembly of the e-bike.
- When the automatic hub interface was removed for maintenance reasons.
- When the system does not work properly.
Manual calibration guides
| Via Enviolo | Via the eBike system |
|---|---|
Step-by-step instructions
Video
Tools
- A bicycle with a Specialized integrated system.
Calibration instructions
- Turn on the e-bike system
- When you have a brand new hub interface, the system will automatically detect it requires calibration, it will show "enviolo calibration needed" in the display. Then click the "+" button to start the calibration.
- To re-calibrate the bike: press and hold the "+" and "-" button until the display shows "Settings", scroll down to "enviolo cal", and press the "F1" button to start the calibration.
- Pedal the bike above 30RPM. This can take up to 25 seconds until you see "calibration OK!" appear on display. The display will automatically return to the setting screen.
- Change the cadence by pressing the F2 button till the display shows "preferred pedal pace"
- Press plus and minus buttons to change the RPM setting accordingly
- Press the F2 button again to return to the "ride" screen.
Calibration done
Enjoy the ride! If you followed all the steps the e-bike is ready to go. If you have any questions, please reach out to our Support team.