This guide will walk you through how to manually calibrate the Enviolo AutomatiQ using a BOSCH system, and when the automatic interface has older firmware (R47/V09 and older).

We recommend auto calibration

If your system is up to date, the Enviolo Automatic will passively calibrate while riding. It is the best way to keep your system optimised – see firmware update guide.

Step-by-step instructions

BOSCH Intuvia

Video

Tools

• A bicycle with a BOSCH Intuvia integrated system.

Instructions

1. Turn on the Bosch Intuvia system.
2. Select no motor assist.
3. Activate the "configuration mode" through simultaneous push and hold of [RESET] and [i] buttons (A & B).
    
4. Push the [i] button (B), until you can see "gear calibration" on the screen.
5. While pedaling, press the "Light" button (C) to start calibration.
6. Pedal the e-bike lightly through the entire calibration process (preferably on a stand with the rear wheel off the ground), while the system shifts from full underdrive to full overdrive multiple times and completes the calibration process.
   • This process can take ~25 seconds.
7. After completion of the calibration process, the system returns to the ride mode automatically.

BOSCH Nyon 2

Video

Tools

• A bicycle with a BOSCH Nyon 2 integrated system.

Instructions

1. Turn on the Bosch Nyon system.
2. Select no motor assist.
3. Enter the "Settings" menu by pressing the [>] and [<] keys and confirm your selection with the pound key [<>].
4. Use [+] and [-] to select the menu item "My eBike" and confirm your selection with [<>] or [>].
5. Select the menu item "eShift" and confirm your selection.
6. Select the menu item "Calibration" and confirm your selection.
7. Pedal the e-bike lightly through the entire calibration process (preferably on a stand with the rear wheel off the ground), while the system shifts from full underdrive to full overdrive multiple times and completes the calibration process.
   •  This process can take ~25 seconds.
8. After completion of the calibration process exit the menu.

BOSCH Kiox

Video

Tools

• A bicycle with a BOSCH Kiox integrated system.

Instructions

1. Turn on the Bosch Kiox system.
2. Select no motor assist.
3. Enter the "Settings" menu by pressing the [>] and [<] keys and confirm your selection with the pound key [<>].
4. Use [+] and [-] to select the menu item "My eBike" and confirm your selection with [<>] or [>].
5. Select the menu item "eShift" and confirm your selection.
6. Select the menu item "Calibration" and confirm your selection.
7. Pedal the e-bike lightly through the entire calibration process (preferably on a stand with the rear wheel off the ground), while the system shifts from full underdrive to full overdrive multiple times and completes the calibration process.
   •  This process can take ~25 seconds.
8. After completion of the calibration process, the system returns to the ride mode automatically.

Other calibration options

Automatic

Enviolo Automatic auto calibration

Auto calibration is the best way to calibrate the Enviolo Automatic – available since firmware version R48 and V10. To update your firmware, see: How to update the Enviolo Automatic with the latest firmware version

Auto calibration keeps the system optimized

If your system is up to date – latest app and firmware – the Enviolo Automatic will passively calibrate while riding. It is the best way to keep your system optimised.

Manual

Enviolo Automatic manual calibration

Manual calibration of the Enviolo Automatic is only required when using older firmware versions (pre-firmware R48 and V10) and after one of the following:

• After the initial assembly of the e-bike.
• When the automatic hub interface was removed for maintenance reasons.
• When the system does not work properly.

Manual calibration guides