This guide will walk you through how to manually calibrate the Enviolo AutomatiQ using a BAFANG system, and when the automatic interface has older firmware (R47/V09 and older).
Step-by-step instructions
Video
Tools
- A bicycle with a Bafang integrated system.
Instructions
- Turn on the Bafang system.
- Select no motor assist.
- To calibrate the bike, double-press the [I] button.
- Scroll down in the settings screen to e-shifting and select ‘Calibration’ to start the calibration.
- Confirm by pushing the I-button.
Other calibration options
Automatic
Enviolo Automatic auto calibration
Auto calibration is the best way to calibrate the Enviolo Automatic – available since firmware version R48 and V10. To update your firmware, see: How to update the Enviolo Automatic with the latest firmware version
Auto calibration keeps the system optimized
If your system is up to date – latest app and firmware – the Enviolo Automatic will passively calibrate while riding. It is the best way to keep your system optimised.
Manual
Enviolo Automatic manual calibration
Manual calibration of the Enviolo Automatic is only required when using older firmware versions (pre-firmware R48 and V10) and after one of the following:
- After the initial assembly of the e-bike.
- When the automatic hub interface was removed for maintenance reasons.
- When the system does not work properly.
Manual calibration guides
| Via Enviolo | Via the eBike system |
|---|---|