This guide will walk you through how to manually calibrate the Enviolo AutomatiQ using a FIT system, and when the automatic interface has older firmware (R47 and V09, and older).
Step-by-step instructions
Video
Tools
- A bicycle with a FIT integrated system.
Instructions
- Turn on the e-bike with the FIT system.
- Enter the setup menu using the joystick.
- Select "Calibration" and confirm by pressing the joystick.
- Select "Calibrate enviolo" and confirm by pressing the joystick.
- Lift up the rear wheel and pedal fast and easy.
- Start calibration by pressing the joystick again.
- Pedal the e-bike lightly through the entire calibration process (preferably on a stand with the rear wheel off the ground), while the system shifts from full underdrive to full overdrive multiple times and completes the calibration process.
- This process will take ~25 seconds.
Other calibration options
Automatic
Enviolo Automatic auto calibration
Auto calibration is the best way to calibrate the Enviolo Automatic – available since firmware version R48 and V10. To update your firmware, see: How to update the Enviolo Automatic with the latest firmware version
Auto calibration keeps the system optimized
If your system is up to date – latest app and firmware – the Enviolo Automatic will passively calibrate while riding. It is the best way to keep your system optimised.
Manual
Enviolo Automatic manual calibration
Manual calibration of the Enviolo Automatic is only required when using older firmware versions (pre-firmware R48 and V10) and after one of the following:
- After the initial assembly of the e-bike.
- When the automatic hub interface was removed for maintenance reasons.
- When the system does not work properly.
Manual calibration guides
| Via Enviolo | Via the eBike system |
|---|---|